Application & Care Guide
Vinyl Decals
For vehicles, windows, and walls.
How to apply?
- Clean surface thoroughly: Make sure the surface is smooth, dry, and free from dust, wax, grease, or residue.
- Position decal with transfer tape: Align carefully before pressing. Use painter’s tape as a guide for larger decals.
- Press from centre outward: Use a squeegee or flat card to apply firm, even pressure and remove air bubbles.
- Slowly remove transfer layer: Peel the transfer tape back at a low angle, making sure the decal stays in place.
Take your time, alignment reflects your brand.
Best Conditions for Application
- Apply in a clean, dry environment
- Ideal temperature: 10–25°C / 50–77°F
- Avoid direct sunlight during installation
- For vehicles, apply to cool surfaces only
- For walls, make sure paint is fully cured before applying
Long-Term Care Tips
- Allow adhesive to set for 24–48 hours before washing or heavy handling
- Clean gently with mild soap and water
- Hand wash vehicle decals when possible
- Wipe window decals with a soft cloth
- Keep edges free from picking, scraping, or pressure washing
What to Avoid
- Applying to dirty, wet, textured, or oily surfaces
- Installing in extreme heat, cold, wind, or humidity
- Using harsh chemicals, solvents, or abrasive scrubbers
- Pressure washing directly over decal edges
- Repositioning after the decal has been pressed down
- Applying to freshly painted walls before the paint has fully cured
Keep Your Investment Looking Ripe!
With proper application and care, vinyl decals deliver a sharp, polished look across vehicles, windows, and walls, helping your brand stay visible and professional.
